snowthrower electrical hand grip

Some snowthrowers have heated grips as options, such as certain MTD models. Wire them complete with a ground to your snowthrower electrical output and then raise up the engine rpm to a normal operating speed. Check voltage at the snowthrower's electrical output lead while it is sending power thru the 4 resistors. If the voltage is above 12vdc, you have enough power.

Our motor heated hand grips heat film for snowblower

Product Description

If you are looking for that prefect grip-not only looks good on your motorcycle, but also gives you the comfort you want,our motorcycle hand warming grip is exactly what you needed.

• 100% brand new and high quality with competitive price
• If cold hands are making your life a misery when you're on the road, it's time to feel the heat
• Keep your hands warm in cold weather
• Flexible , easy fit under your motorcycle handgrips
• Quick warm up time
• Work with all ATV
• Don't suffer any more - get your heated handlebar grip now

Product Application

Application in all motorcycle.motorbike.snowblower.snowmobile and all-terrain vehicle(ATV)

For handle bar warming

Product Specification

Input voltage AC 12.5V

Initial resistance 38.4-48.9Ω

Power 3.6W±12%

high voltage resistance 500Vac/0.5mA/2s

Insulation resistance ≥100MΩ500Vdc

lead strain ≥0.5Kgf/1min

Construction.Size

1.Size:35*79mm

2. Lead : UL2468 # 20 black PVC double row line, 340 mm long. The exposed length is 330 mm (WEF)

3. With ample 1-480318-0 connector terminals with AMP - 61117-1

Certificate

We appreciated your interest in our product

Please advise us below info. for our reference and get contact with us to find your best heating solution.

Size

Max temperature,

Voltage

Wattage

Application

Product Drawing Draft(if available)

Kategorije proizvoda : Film za grijanje kućnog aparata > Grijani elementi za držanje